Free follow focus gear generator stl

Free tool

Follow Focus Gear Ring
Generator — Free STL Download

I created this tool because I kept running into the same problem on set: a lens without a gear ring, no local store, no time to wait for shipping. With this generator you can create a custom Mod 0.8 follow focus gear ring in seconds — just enter your lens diameter and download a print-ready STL file.

The same gear ring also works perfectly as a lens aperture ring — any lens with an exposed aperture barrel can be modded the same way.

Tool gratuito

Generatore di gear ring
per follow focus — STL gratis

Ho creato questo tool perché mi sono ritrovato troppe volte sul set con un obiettivo senza gear ring, nessun negozio in zona e nessun tempo per aspettare una spedizione. Con questo generatore puoi creare in pochi secondi un gear ring Mod 0.8 personalizzato — basta inserire il diametro e scaricare il file STL pronto per la stampa 3D.

Lo stesso ring funziona perfettamente anche come anello di apertura per obiettivi con barilotto esposto.

How to use

01
Measure your lens with a caliper where the gear ring will sit. No caliper? Use a tape measure: measure the circumference and divide by π (3.14159).
02
Enter the inner diameter — the measurement you just took.
03
Choose the outer diameter — defines tooth height. A 6–10mm difference from inner diameter is a good start.
04
Set the height — the usable space on the lens barrel.
05
Download the STL and send it to your slicer.
The +0.4mm bore tolerance option adds a small offset to the inner hole. From my experience printing dozens of these rings, 0.4mm extra keeps the fit snug without being too tight — adjust based on your printer.
3D printing tips
  • Layer height: 0.4mm
  • Infill: 40–60%
  • Supports: not needed
  • Material: PLA or PETG work great — TPU gives a tighter grip
I hope this tool saves you time on set. If you find it useful, share it with your crew.

Come si usa

01
Misura l'obiettivo con un calibro nel punto dove il ring si appoggerà. Senza calibro: misura la circonferenza e dividi per π (3,14159).
02
Inserisci il diametro interno — la misura appena presa.
03
Scegli il diametro esterno — determina l'altezza dei denti. 6–10mm di differenza è un buon punto di partenza.
04
Imposta l'altezza — lo spazio utile sul barilotto.
05
Scarica l'STL e portalo nel tuo slicer.
L'opzione +0,4mm di tolleranza aggiunge un offset al diametro interno. Dalla mia esperienza, 0,4mm in più mantiene la presa giusta — aggiusta in base alla tua stampante.
Consigli stampa 3D
  • Layer height: 0,4mm
  • Infill: 40–60%
  • Supporti: non necessari
  • Materiale: PLA o PETG — TPU per presa più morbida
Spero ti faccia risparmiare tempo sul set. Condividilo con la tua crew.